Sliding Blade Gate 4.3MX1.8M (SLBL43-1.8M)

The gate is fully welded with no screws used, unlike similar gates found elsewhere. Fins are laser welded to the frame, and the frame is TIG welded. Each fin's top is laser welded with aluminum caps to prevent water entry. No plastic is used. The gate is made of aluminum, with the main structure being a strong 75 x 50 mm square profile, 3 mm thick. Fins measure 65 x 16 mm and are 1.2 mm thick. The top railing is 50 x 50 mm and 2.4 mm thick. The weight of the gate is about 80 kg.

Gate is 4345mm wide and 1750mm high. Gate fits 4M gap between posts.

The gate comes with the following:

• Aluminum angle track for the top slider guide
• Slider guide channel
• Polymer block for the top slider
• Bottom wheels
• Bottom metal tracks
• Concrete anchors for tracks
• Gate catcher
• Gate open stopper