Sliding Slat Gate 4.3MX1.8M (SLST43-1.8M)

The gate is fully welded with no screws used, unlike similar gates found elsewhere. Slats are laser welded to the frame, and the frame is TIG welded. No plastic is used. The gate is made of aluminum, with the main structure being a strong 100 x 50 mm square profile, 2.5 mm thick. Slats measure 65 x 16 mm and are 1.2 mm thick. The top railing has 5mm wider rib for the roller guide. This prevents whole top rail touching roller guide. The weight of the gate is about 80 kg.

Gate is 4300mm wide and 1785mm high. Gate fits 4M gap between posts.

The gate comes with the following:

• Two Roller Guide
• Bottom wheels
• S/S Bolts for wheels
• Bottom metal tracks
• Concrete anchors for tracks
• Gate catcher
• Gate open stopper