PRODUCT CATEGORIES
The EMX VMD202-30M Wand is designed to detect iron based metal in motion. This comes with 30M direct burial cable. EMX VMD202-30M is Made in USA. This Wand comes with VMD202-R Remote Controller for better results. Wand has to be minimum 2M away from 230V or 24V AC power cables
$475.00
Tax included
EMX Exit Wand (VMD202-30M)
Product Code : VMD202-30M
The EMX VMD202-30M Wand is designed to detect iron based metal in motion. This comes with 30M direct burial cable. EMX VMD202-30M is Made in USA. This Wand comes with VMD202-R Remote Controller for better results. Wand has to be minimum 2M away from 230V or 24V AC power cables
EMX VMD202-30M SINGLE PIECE VEHICLE MOTION DETECTOR. VMD202-30M is Made in USA. This unit comes with 30M long 5 core direct burial cable. Sensitivity of the Wand can be adjusted with VMD202-R Remote Controller and comes with VMD202-30M. Use Ground Earth Spike with the wand.
- Sensing probe is buried to protect against vandalism
- Wide range of power supply options
- Easy installation
- Low current consumption, ideal for solar applications
- Easy to integrate with security control boards, gate and door operators
- Direct burial cable
VMD202 Install at least:
- 6-10 feet away from buried power, telephone, or invisible dog fence
- 10 feet away from natural gas lines
- 20 feet away from power pole with a transformer
- 100 feet back from railroad traffic
- 200 feet away from high power substation power lines
- 30 feet back from gate operator
Specifications:
- Range Sensitivity: 12ft @ 5mph minimum speed (depends on mass & speed)
- Output Time: 5 seconds
- Surge Protection: Probe input circuitry protected by surge suppressors
- Relay Output Configuration: Form C (SPDT)
- Relay Contact Rating: 1A @24VDC, 0.5A @230VAC
- Power Input: 9-41VDC or 6-29VAC
- Standby Current: 0.25mA
- Detection Current: 12mA
- Operating Temperature: -40C to 82C (0-95% relative humidity)
- Probe Housing Material: PVC water-tight
- Probe Dimensions: 24”L X 1”Dia
VMD202-30M
New product