Infra-Red beam is used to control the gate. This has two components Transmitter and Receiver. Transmitter has two wires and receiver has 4 wires two are control signal wires which connects to the Gate Opener.
$80.00
Tax included
Photocell (P-CELL1)
Product Code : P-CELL1
Infra-Red beam is used to control the gate. This has two components Transmitter and Receiver. Transmitter has two wires and receiver has 4 wires two are control signal wires which connects to the Gate Opener.
Infra-Red beam is used to control the gate. This has two components Transmitter and Receiver. Transmitter has two wires and receiver has 4 wires two are control signal wires which connects to the Gate Opener.
This system is mostly used as safety set up for the Automatic Gate. When a person or an object (car etc) gets caught while the gate closes, this beam will stop the gate. However, this can be set up as an access control method to open or close the gate too.
Maximum working Range is 15M
Power supply is 12 to 24V AC or DC
Operating Temperature -20C to 70C
Relay output is 1 Amp /30V and NO/NC can be selected.
Dimensions 49 X 76 X 22mm
P-CELL1
New product