Ute Rack for Ladders (URACK)

Width of the Ute Rack is adjustable from 1330mm to 1900mm. Height is 730mm. Maximum loading capacity is 227Kg. Complete kit comes with two sets of racks(for one vehicle) and mounting accessories. Great to carry ladders on the Ute.

• Made out of strong 50mm diameter and 2mm thick tubular steel.
• Complete frame is powder coated in satin black colour.
• Use this cargo racks to free up the deck space with large loads. Great to support ladders, Kayaks, long pipes, conduits or any other heavy large items which can rest on two bars.
• Installation is easy and instructions are supplied with it.
• Easy to remove when not in use.
• This is universal a cargo rack and fits most makes and models.

Position the front mounting plate of the upright leg as close to the cab as possible. Locate the pre-drilled hole in the footplate that is furthest from the leg and drill a 10mm hole through the truck’s bed rail.  A second hole for a bolt must be drilled through both the footplate and the truck’s bed rail as close as possible to the front leg without obstructing access to the bolt underneath the truck’s bed rail. This bolt must be accessible in order to put on the washer and nut. Attach the footplate to the truck using given bolts, washers and nuts.

Secure the cross brace to each upright leg with the given M8 hex bolts. Insert the cross brace extension into each cross brace and set the assembly on top of the upright legs. Secure the cross brace extension with given allen head set screws.

To install the rear portion of the Ute Rack on the truck bed, repeat the above steps. Before drilling the mounting plate, ensure that the plate does not overhang or interfere with the tail gate.