$350.00
Tax included

Video Intercom with Keypad (VID7)

Product Code : VID7

Stainless Steel, IP Rates, Vandal resistance and Night Vision CCD Camera unit with built in illuminated Keypad. This works only with our 4-wire S/S Intercom Monitors.

Quantity

IP Rated, Vandal Resistance, Stainless Steel, Night Vision CCD Camera unit with built in illuminated Keypad. Four wire connection from Outdoor camera to Indoor monitor. Check our Gel filled CAT5E Shielded Cable to use with this intercom.

  • Stainless Steel vandal resistance outdoor unit
  • 8.5mm Colour CCD camera with Infrared night vision video
  • Built in Keypad with Illuminated key pad to open the gate.
  • Waterproof to IP55 rating
  • Flush Mount or Surface Mounting facility
  • Gate open connection from Outdoor Unit
  • Connection facility for 4 monitors

Installation:

Take extra precautions if this Intercom is installed without Mounting Bracket. Use silicone sealant to seal screw holes of back polymer cover. Also get the wires from bottom of the back cover.

If using Mounting Bracket for surface mounting, wires need to enter from lower elevation to avoid water getting into the Intercom. Also, silicone seal mounting four holes. Drill a small hole bottom of the Mounting Bracket to drain condensate water

Technical Specifications:

  • Operating voltage: DC14.5V (supplied by Indoor monitor & gate opener)
  • Operating temperature: -20 to +55℃
  • Camera: 1/3"CCD
  • Communication mode: Duplex communication
  • Maximum length of the cable with indoor monitor: 70M
  • Talking time: 60s
  • Dimension: 250 X 120 X 50 mm

Few different Indoor Monitors available for this intercom but not included with this unit.

VID7
New product

New Account Register

Already have an account?
Log in instead Or Reset password