Sliding T & G Gate 4.8MX1.5M (SLTG48PWT)

The gate is fully welded with no screws used, unlike similar gates found elsewhere. Tongue and groove slats are laser welded to the frame, and the frame is TIG welded. No glue or plastic is used. The gate is made of aluminum, with the bottom rail being a strong 100 x 50 mm square profile, 2.5 mm thick. Tongue and groove slats measure 75 x 20 mm and are 1.2 mm thick. Rounded corners of vertical slats give a nice appearance to the gate.

Gate is 4800mm wide and 1450mm high. Gate fits 4.5M gap between posts. Weight of the gate is 90Kg

Gate comes with following hardware to install.

• Gate Sliding Tracks and concrete anchors
• 2 Sliding Wheels with S/S bolts
• Top Roller Guide
• Close End Stop with side bracket
• Open End Stop

Optional matching Pedestrian Gates, Gate Posts and Automatic Gate Openers available in our website