Receiver 2-Channel (SOMcom2.1)

Product Code : SOMcom2.1

SOMcom2.1 radio receiver 868,95 MHz NEUTRAL version ML black 2-channel, 40 memory slots, 1 input

Easy conversion of third-party operators and when changing the radio frequency
One input for gate status to make incompatible operators SOMweb-capable
Feedback of the status of a sensor connected to the input or the relay using a transmitter (e.g. Pearl Status)
Integrated antenna: optional external antenna can be connected
Memory: 40 radio commands can be programmed
Slot for memory extension Memo (450 radio commands)
Control output: 2 potential-free relay contacts (normally open, 1 A, DC 30 V)
Sensor input / button input 1
Connection: 8-pin spring terminal
Active forwarding of the radio signal by SOMloq2 receiver (hop function)
Compatible with SOMlink S2
Operating mode:
Tap mode (Tip): Relay is activated as long as the radio signal is present
Defined ON/OFF: Command for defined switching on and command for defined switching off
Switching mode (Toggle): Relay can be switched on and off via radio like a surge relay (can only be set via SOMlink S2)